Convertibars Moto Guzzi: V11 Lemans User Manual download pdf

Moto Guzzi V11 Lemans

Bike Specific Install Notes and Tips

This is an aftermarket product that fits up different than the stock components, therefore, the installer may be required to

set up components and to route lines in the ?best way possible?, which may not always be listed on this ?Bike

Specific? installation sheet. In any case, the installation must allow the handlebars to reach both steering stops, with

out pulling taught or kinking any lines, and without damaging any part of the motorcycle

Important Installation Considerations

Clean and simple install. Note: We have had mixed feedback on the length of

the stock brake line and how much rise it will allow. Be sure to check the length

before ordering.

Special Kit Requirements/Installation Tips

1. Contact - Slight fairing contact is ok as long as the steering stops can be

reached with out damaging the fairing

2. Reservoir Mount(s) can be carefully bent to allow more rise.

Restrictions

1. Upper fairing and or windshield can be trimmed for more rise.

2. Foreword Positions restricted by instrument panel

Line Routing

1. Throttle lines - Stock Length - Route below the brake lever

2. Throttle Lines - Stock length - route behind the right fork tube

3. Electrical Lines to be freed from their brackets and or Zip Ties, and run on the

rider's side of the forks

Recommended Riser Trim Length

1. 8.0" Riser Length = No Trimming

Recommended parts and replacement lines

1. Hydraulic Brake Line Top Fitting - 90 degree face to the side

1 2

Moto Guzzi V11 Lemans Bike Specific Install Notes and TipsThis is an aftermarket product that fits up different than the stock components, therefore,

Page 2

No comments

Convertibars Moto Guzzi: V11 Lemans User Manual